No Picture

Jet 719500 JWL-1640EVS 1.5 hp 115V Lathe

November 8, 2016 admin 0

The new Jet 16” x 40” electronic VARIABLE speed woodworking LATHE is loaded with cutting-edge features that distinguish it from others in its class. Included is a sliding headstock that also pivots 360 degrees, electronic infinitely VARIABLE speed from 40 – 3200 rpm, and a newly designed headstock locking handle.

No Picture

JET BD-920W Lathe with S-920N Stand

November 7, 2016 admin 0

The JET BD-920W bench lathe is built with same innovation, quality and dependability JET puts into all its metalworking products. The BD-920W comes with a standard 1/2in. x 8 TPI spindle mount that allows for many aftermarket accessories, a reversing switch for added versatility, plus the S-920N stand so you can set up and get to work on metal lathe projects right away. Dimensions L x W x H (in.): 38 x 20 x 48, HP: 3/4, Thread Cutting (mm): 0.5-3, Spindle Speeds (qty.): 6, Speed (RPM): 130-2,000, Volts: 115, Width Between Centers (in.): 20, Stand Included: Yes, Thread Cutting (in.): 8-56 TPI, Carriage Travel (in.): 16

No Picture

JET 321101AK GHB-1340A Lathe with CBS-1340A Stand

November 6, 2016 admin 0

Powerful performer helps you deliver precision metal parts in less time, thanks to geared head. Gear box gives you large threading and feed capabilities without gear changes. 6in. three-jaw chuck. 8in. four-jaw chuck. 12in. face plate. Metric change gears. 4-way tool post. Steady and follow rest. Precision-ground D1-4 spindle. 13in. swing over bed. 18 3/4in. swing through gap. 40in. centers. 1 3/8in. hole through spindle with #3MT. Cuts 40 inch threads and 27 metric threads. Width Between Centers (in.): 40, Spindle Speeds (qty.): 8, Thread Cutting (in.): 4-112 TPI, HP: 2, Stand Included: Yes, Volts: 230, Carriage Travel (in.): 35, Speed (RPM): 70-2,000, Thread Cutting (mm): 0.2-6

No Picture

Jet JJP-8BT 8-Inch Bench Top Jointer/Planer

November 6, 2016 admin 0

The JET 8in. Jointer/Planer Combo is ideal for smaller shops or limited space on the job; the compact benchtop design fits conveniently in small shop environments. This powerhouse has features usually only found on big floor models. Precision adjustment knobs, compact design, and a powerful 13 Amp motor are only a few features that make this jointer/planer the right choice for wherever you may need it. Cuts Per Minute (CPM): 18,000, Fence: 4 1/8 x 21, Amps: 13, Cutting Depth (in.): 1/8, Rated RPM: 9,000, Tool Length (in.): 33 1/2, Case Included: No, Cutting Width (in.): 8

No Picture

Jet – JWP-208HH: 20-inch Helical Head Planer, 5 HP 1 Phase

November 5, 2016 admin 0

708544 Features: -Two speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs.-Large, cast iron, precision ground table for precise work piece support.-Positive gear drive moves table quickly and accurately.-Cast iron in feed and out feed tables come with the machine.-Large hand wheel with positive gear drive allows for quick and accurately table adjustments.-1/16”” increment height scale lets you make the most precise adjustments for fine cuts.-one piece welded steel base offers solid support and stability.-Cutter head diameter: 3.19””.-Cutter head speed: 5000 RPM.-Feed Rate: 24 and 31 FPM.-number of Knives: 92 four sided inserts.-Table size: 25 0.75”” x 20””.-Dust Port diameter: 5””.-number of speeds: 2.-Range of speeds: 24 and 31 FPM. Construction: -Heavy duty cast iron and steel construction for added strength and durability. Color/Finish: -Helical cutter head with index able carbide inserts for a superior finish and quieter cut. Specifications: -Powerful 5 HP TEFC induction motor with three V belt transmission for smooth and consistent power. Dimensions: -Dimensions: 23”” H x 28”” W x 44”” D. Collection: -5”” dust port provides efficient chip and dust collection.-Dust collection minimum cfm required: 400 cu.ft/min.

No Picture

JET 708528 JWP-208-1 20-Inch 3 Horsepower Planer, 230-Volt 1 Phase

November 4, 2016 admin 0

708528 Features: -Four high speed steel cutter knives produce faster, smoother cutting.-Two speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs.-Large, cast iron, precision ground table for precise work piece support.-Sets of three steel in feed and out feed rollers to help in the prevention of snipe.-Positive gear drive moves table quickly and accurately.-work table is precision ground and polished for consistently smooth operation.-Large hand wheel with positive gear drive allows for quick and accurately table adjustments.-1/16”” increment height scale lets you make the most precise adjustments for fine cuts.-Cutter head diameter: 3.19””.-Cutter head speed: 5000 RPM.-Feed Rate: 24 and 31 FPM.-number of Knives: 4.-Table size: 25 0.75”” x 20””.-Dust Port diameter: 5””.-Blade size: 20”” x 1”” x.13””. Construction: -Heavy duty cast iron and steel construction for added strength and durability. Specifications: -Powerful 3 HP TEFC induction motor with three V belt transmission for smooth and consistent power. Dimensions: -Minimum planning Length: 60.75””.-Dimensions: 43”” H x 37.5”” W x 29.5”” D. Collection: -5”” dust port provides efficient chip and dust collection.-Dust collection minimum cfm required: 400 cu.ft/min.

No Picture

JET 708531 JWP-16OS 16-Inch 3-Horsepower Open Stand Planer, 230-Volt 1-Phase

October 30, 2016 admin 0

708531 Features: -Cutter head with three high speed steel knives locks firmly in place to prevent movement while in use.-Two speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs.-Large, cast iron, precision ground table for precise work piece support.-Surge in feed and out feed rollers give your work piece maximum support during planning operations.-Large hand wheel with positive gear drive allows for quick and accurately table adjustments.-Exclusive angled 4”” dust port keeps your dust hose out of the way.-Heavy duty steel wide base open stand with casting pads provides support and stability of the tool during use.-Magnetic controls provide long life and reliability.-Maximum planning: 16””.-Cutter head speed: 4500 RPM.-Cuts Per Minute: 13500.-Feed Rate: 16 and 20 FPM.-number of Knives: 3.-Dust Port diameter: 4””.-Blade size: 16.13”” x 1”” x.13””. Construction: -Heavy duty cast iron and steel construction for added strength and durability. Specifications: -Powerful 3 HP TEFC induction motor with three V belt transmission for smooth and consistent power. Dimensions: -Dimensions: 30”” H x 22”” W x 32”” D. Collection: -Dust collection minimum cfm required: 400 cu.ft/min.

1 2