No Picture

WEN 3420 8″ by 12″ Variable Speed Benchtop Wood Lathe

June 11, 2017 admin 0

Remember when you could turn your own Table legs? fill your house with as many Table legs as you can with the WEN 8-inch by 12-inch variable speed wood Lathe. Adjust the variable speed anywhere from 750 to 3200 Rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 Spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 2A motor to keep things turning. The easy-to-use lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a Flat wrench, a headstock spur center, a Tailstock cup center, a Knockout rod and a 5-inch faceplate for turning bowls, cups and other non-spindle workpieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, bowls, cups, chess pieces and more? remember WEN.

No Picture

BEAMNOVA Bench Top Wood Lathe 10″ x 18″ Variable 5 Speed 1/2 HP Benchtop Wood Working Lathe

April 9, 2017 admin 0

Technical Specification´╝Ü
– Motor power: 370W
– Class of speed: Variable
– Spindle speed(50Hz): 500 – 3150rpm
– Swing over bed: 254mm(10″)
– Distance between centers: 457mm(18″)
– Drive spindle: 1″8RH thread or other
– Head and tailstock taper: MT2 or other
– Face plate: 76.2mm(3″)
– Tool rest: 152.4mm(6″)

Features´╝Ü
– With five adjustable speeds, this bench top wood lathe lets you tackle a variety wood turning projects!
– The lathe handles work pieces up to 10″ in diameter and 18″ long and features a pull-out switch to prevent unwanted or unsupervised operation.
– With a cast iron steel construction and nonslip rubber feet for reduced vibration, this wood lathe provides sturdy, reliable results on wood.
– 5 speeds: 750, 1100, 1600, 2200, 3200 RPM Extremely sturdy cast iron construction to reduce vibration Pull-out switch allows lock out Includes 3″ faceplate and 7″ tool rest – Nonslip rubber feet Amperage (amps)7.5 Bench or Stationary Bench Faceplate (inch)3 inch.
– Headstock taperYes Horsepower (hp)1/2 MaterialCast Iron Maximum speed (rpm)3200 Minimum Speed (RPM)750 Number of speeds5 Phase Single Reversible (y/n)No Tailstock taperMT1 Variable speed (y/n)No Variable speeds (RPM)750, 1100, 1600, 2200, 3200 Voltage (volts)110.
– Accessories Includedthree hex wrenches, live center and spur center, 3 inch faceplate and 7 inch tool rest.

Package included:
1 x Heavy duty 5 speed bench top wood lathe

No Picture

Powermatic PM2020 2 hp 1/3 PH 30V Short Bed Lathe

December 4, 2016 admin 0

The features you love on the 3520B Lathe are now available in a smaller Footprint. The PM2020 Lathe is perfect for turners short on space, or projects where a short bed is convenient. Like its big brother, the PM2020 features a sliding headstock, electronic variable speed with low and high speed ranges, and the spindle lock. The enhanced features include a digital RPM readout, built in spindle indexing on the head stock, and a re-designed Tailstock with internal storage, chrome trimmed handwheels, and a laser etched quill which is self-ejecting. Additional features include a two position mount for the optional bed extension, a sliding hammer knockout rod with brass tip, an attached tool Caddy and a metal shelf for tool storage.

No Picture

NOVA 24146 1624-44 16-Inch by 24-Inch 8 Speed Wood Lathe

December 3, 2016 admin 0

NOVA 24146 1624-44 16-Inch x 24-Inch Wood Lathe offers a solid 1.5HP AC motor, 16″ swing capacity (expandable to 29″ capacity outboard with optional outrigger accessory) and 24″ between centers, expandable in 20″ increments with the optional bed extension accessory. Excellent entry level lathe that has enough versatility and power to give many years of turning. 8 speed range, from a low 215rpm through to a high of 3600rpm. Steel and cast iron stand included as standard equipment. Full swivel head functionality and solid cast iron components complete the package. Available in 11/4″8TPI thread. Includes 1.5HP AC Motor, Belt, Stand, 2MT Live Center, 2MT Spur/Drive Center, 3″ Faceplate, 12′ Tool rest, Manual and fastenings. Designed by Teknatool International, innovating since 1955. Backed by a full replacement 2-year warranty on all parts, and a further 3-Year limited warranty on all parts excluding motor, electronics, consumables, for a total of 5-Years limited warranty. Call our customer service center on 727-954-3433.

No Picture

PSI Woodworking KWL-1018VS Turncrafter Commander 10″ Variable Speed Midi Lathe

December 3, 2016 admin 0

The best 10″ lathe for your money. ETL Listed and certified by Intertek. Powered by a 3/4 hp high performance motor and an SBC microprocessor, developed for automotive applications, delivering precision control and lasting reliability. 3/4 hp Variable Speed Motor (110V). Two belt positions: Position A 500-2000 RPM & Position B 1500-3600 RPM. Digital readout allows you to work at precise speeds. Headstock Thread is 1″ x 8tpi. Headstock and Tailstock Taper is #2MT. Distance between Centers is 18″. Swing over Bed is 10″. Tailstock and Spindle Bore is 3/8″. Quill Travel is 1-5/8″. (24) indexing positions with spindle locking. Included: tool storage rack, work light with 18″ flex cable, 6″ tool rest, 12″ tool rest, 3″ Faceplate, Spur Drive Center, Tailstock Live Center, Hex Wrench(set of 4), Rubber feet(4), Knockout Rod, Phillips Screw Driver, Tailstock handle & bolt, Safety Goggles. Convenient built-in handles. Cast Iron base accepts optional extension bed for turning projects up to 42″. Motor may run faster/slower.

No Picture

12 X 20 Combo Lathe with Two Separate Motors That Allow for Use of Both the Mill and Lathe At the Same Time, 1″ Spindle Bore, 6 Speeds 160-1600 Rpm, Power Feed Ships with Standard Accessories and Full 1 Year Warranty

December 1, 2016 admin 0

Our combination lathe/ milling machine will by far exceed your expectations, with tolerances that would satisfy the most skilled machinist,12″ swing over bed, 20″ distance between centers, 1″ spindle bore, 6 speeds 160-1600 RPM, thread range 11-40 TPI, 0.5 -3.0 mm, x-y axis power feed forward & reverse,

No Picture

Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe

December 1, 2016 admin 0

Featuring a ball-bearing live center, heavy-duty steel knockout bar, and onboard storage for easy access to adjustment tools, the Delta 46-460 industrial 12-1/2-inch variable-speed midi lathe handles even heavy-duty jobs with ease. Ideal for professional woodworkers, this machine gives you fast, smooth results and offers variable speed for consistency and control.

callout box top
Industrial 12-1/2-Inch Variable-Speed Midi Lathe
At a Glance:

  • Powered by a 1-horsepower max, 1,725-rpm motor for robust performance
  • 12-1/2-inch swing capacity–the largest in its class
  • Variable speed with three pulley-speed ranges
  • Includes 6- and 10-inch tool rests and 3-inch face plate
  • Backed by a five-year warranty
callout box bottom
DELTA 46-460 Industrial 12-1/2-Inch Variable-Speed MIDI LATHE With a 12-1/2-inch swing, the 46-460 has the largest capacity in its class.
View larger.
DELTA 46-460 Industrial 12-1/2-Inch Variable-Speed MIDI LATHE
The extension bed increases the overall bed length to 42 inches. View larger.

Powerful Motor and Variable Speed for Consistency and Precision
Powered by a 1-horsepower max, 1,725-rpm motor, the Delta 46-460 industrial 12-1/2-inch variable-speed midi lathe provides a 12-1/2-inch swing capacity–the largest in its class. Variable speed with three pulley-speed ranges makes it easy to select the required speeds needed to turn a project without changing belt position.

Forward and Reverse Provides a Superior Finish
For accuracy and precision, forward and reverse functions allow the turner to achieve a superior finish. As woodworkers know, sanding a turned piece with the grain causes the wood fibers to lie down and remain rough while sanding a turned piece against the grain will shave the wood fibers smooth. Rotating the turned piece in both directions is the way to achieve a truly smooth finish, yet it often involves remounting the work piece backwards–a time-consuming and often impossible task. With the 46-460, this process is simplified. With a quick flip of the switch, it’s done.

Patented Belt-Tensioning System for Fast Speed Changes and Longer Tool Life
A patented belt-tensioning system makes for quick speed changes, and sets the belt at the correct tension every time for maximum power transfer and longer tool life. And large objects are no problem with the six-groove belt that provides superior power for effortless turning.

Cast-Iron Construction for Durability and Strength
Durable and stable with all cast-iron construction, the 46-460 also includes a three-inch face plate, and 6-inch and 10-inch tool rests for tool support in a variety of turning applications.

Warranty Information
The Delta 46-460 industrial 12-1/2-inch variable-speed midi lathe is backed by a five-year warranty.

What’s in the Box
12-1/2-inch variable-speed midi lathe, 6-inch and 10-inch tool rests, chrome 3-inch face plate, tool rest base, knockout bar, live center, wrenches, and manual.


DELTA 46-460 Industrial 12-1/2-Inch Variable-Speed MIDI LATHE
Variable speeds let you perform a variety tasks without changing the belt position.


No Picture

Steelex ST1008 Benchtop Wood Lathe, 10″ x 15″

December 1, 2016 admin 0

All cast-iron construction and a 1/2 HP motor provide plenty of stability and power to turn bowls up to 10″ wide and spindles up to 15″ long, or 38″ long with the optional bed extension. This stable Benchtop wood lathe has six speeds from 480 to 4023 RPM. Includes live center, spur center, 3″ faceplate, and tool Rest.

1 2 3 5